New released! ETA's latest product line. The ESS-Series features excellent cost-benefit ratio, high efficiency, mall size

300W ultra compact high efficiency AC-DC converter
low profile and fanless (no audio noise) superb cooling
by natural airflow. Space and cost saving.

A surprising flat body makes the new
released NEE-Series fitting in most
U1 applications. The converter is accepting an input range of 85-265Vac and delivers 150W. A PFC controller is
optimizing line losses up to 99% With
five different single output voltages
of 3.3 / 5 / 12 / 15 / 24 the modules
is usable for various systems. It measures only 92 x 163 x 34mm!

OJS-Series is a newly launched switch-
mode power supply for SMT desinged applications. With 4 pins and a wide range input from 85-264Vac the converter is delivering single outputs
of 3.3/5/12/15/24Vdc

A milestone has been achieved with the
new NS-Series regarding ripple noise.
A smart concept and layout contributed
to a minmal ripple noise. Universal input (85-264Vac)and two single outputs (5 & 24Vdc) are available. The
NS-Series is fully approved to EN 60950
as well as UL and CSA.

A new PFC-Frontend in metalic housing
delivers more than 600W. The new lounched EPF-Series is equipped with universal input 85-264Vdc and delivers a DC output of 380-400Vdc. Its has a
built-in active PFC of 95%. A compact
size (96x170x39mm) saves space.

A NEW and compact generation of AC-DC converters with universal input range for worldwide use. The NED series is a 100W single output AC-DC switchmode power supply with single outputs ranging from 3.3 to 24Vdc.The high efficiency topology (91%), its low profile for U1 applications and full ROHS compliancy makes it easy for designers to use for embedded solutions.

The ETA POWER Selection Guide 2006/2007 Online. An overview with details and technical information on ETA's family of power supply products.

The new released TBF-Series is a frontend with an input of 170-264Vac. A built-in active PFC of upto 99% delivers an optimized output. The TBF-Series is available for 1 & 3 Phase applications. Outputs are available with 3.3 / 5 / 12 / 15 / 24 / 48Vadc.
A space saving compact design is well suited for space critical applicaitons.
It measures only 98x178x85mm.

The OTQ series are highly reliable DC-DC converters, isolated, high quality, and made especially for distributed power applications where direct soldering (lead free)onto PCBs according to ROHS Directives is expected.
Vertically and horizontally positioned pins makes SMD production easy. Due to vertical placing, the OTQ-Series is an excellent space saver. Power ranges from 1.5 - 10W and is available with wide input 4:1, they cover a range of 4,5-72Vdc, ouput ranges from 5-24Vdc in both single- and multi-output.
Application include: LED, LCD, TfT displays; Info-pannels; portable devices; IT & Telecom applications; gaming machines; etc.

For more information please click on "support" on this homepage.

High efficiency, high standards and a Peakload of +200% describes our PF-series power supply in short. Available since 2000, it is still one of the best high current power supply solutions available on the market today. The openframe power supply PF-Series was been developed for applications where high current is needed for a short time and the recovery time is low.

Semiconductor-, Robotic-, Conveyor-, elevator & escalater- manufacturers have highly appreciated ETA22s efforts to fulfill these needs. The PF-Series can maintain high currents during a cycle of 10seconds, with a recovery time of approximately 14 seconds, it is perfect for starting motor-driven solutions!

This absolutely remarkable feature plus an active PFC controlled input circuit, an extra ordinary EMI performance, compliancy to EN 55022 curve B as well as EN 60650 norms and certified by VDE, UL & C-UL gives the PF-Series an almost unbeatable advantage in a harsh environment.

Three models with nominal 75W (P150), 120W (P240) and 240W (P480) are available. The rated single outputs are cover 12, 24, 36, 48Vdc. The universal input allows access to any AC main around the globe.

The efficient design has made it possible to reduce not only size but cost as well. This results in a low cost, ready to mount PSU which fulfills all standards. It offers the maximum in benefits for purchaser, designer and enduser.

Super converter sets new standard in size & efficiency - tops 96%!

300 Watts of power have been compacted into a 76x124x36 mm power supply. Size reductions have been achieved of nearly 6 times that of conventional 300W power supplies of this type. Our revolutionary dcdc concept reduces cost in terms of its ultra high efficiency at 96% via a fan-less operation (fan=high risk of failure & low MTBF) and omission of additional heatsinks for ultra small size constraints. A significant energy saving converter with only
a 4% loss = 12Watts. Remarkably, the temperature at full load is only
30-40°C!

Matching our dedication to high quality benefits for the application, this compact converter's ultra low operation temperature is due to almost lossless switching. Additionally, it operates soundlessly. Last but not least, the extremely long life cycle and top reliability makes this converter indispensable for applications like medical and laboratory equipment, power plants, military & space equipment,
the automotive and transportation industries (mainly power management in automobiles), industrial servers or other types of applications which require noiseless functioning and low temperature environments.

The ETF Converter is a direct current converter with a wide input range of 200-400Vdc and single outputs of 5/12/15Vdc.

For detailed specifications and further informaiton please click "support".

Super ETG converter sets new benchmark in space and efficiency topping 95%!

4 x (times) more power in 3 x (times) less space compared to a conventional 150W converter. (refer to pic.)

The patented topology achieves a constant 95% efficiency, independent of load and input voltage changes. As a result, this new converter family requires no heatsink or fan, and benefits from significantly reduced size, power losses and low operation temperature.

The 600W ETG-Series with an input range of 200 – 400VDc offers a single output of 5Vdc (further outputs will follow soon). Furthermore, a new 1000W unit with the same characteristics is under development.

A benchmark has been achieved in terms of power density: the 600W ETG-Series represents around 1800W/dm³!

The ultra compact dimensions open up new applications in fields where miniaturisation is a key factor for further success, for example computers, car industry (supporting light concepts, heating-system, wippers, GPS, etc.) medical equipment, telecom, and many other space critical devices!

For more infos click to support at our homepage.

A new type of high efficiency dc-dc converter has been lounched by ETA Power recently. The benefits for your
applications are significant! Take a look and click to PDF-File below.

100W super converter sets new benchmark in size & efficiency - tops 95%!

The scales of economie have been the merit for the development of this dcdc converter. This dcdc concept reduces cost in terms of ultra high efficiency via fan-less operation (fan=high risk of failure & low MTBF) and omission of heatsink elements (remarkable space saving)

The highest benefit of this super converter is its ultra low operation temperature due to an almost lossless switching. A further advantage is its soundless operation. Last but not least is an extremely long life-cycle and top reliability - all making this converter indispensable for applications like laboratory equipment, power plant stations, the automobile and transportation industries (mainly power management in automobiles), industrial servers or various applications which need to operate in noiseless and low temperature environments.

The ETD-Series is a direct current converter with a wide input range of 36-72Vdc and 200-400Vdc. Single outputs are available in 2.5 / 3.3 / 5 / 12 / 15 / 24 / 48 Vdc

For detailed specifications or questions click on the PDF below or go to "support" on our homepage.

INCREDIBLY HIGH EFFICIENCY 94%!!

A LOGO keeps its promiss! ETA, is the 5. letter of the greek alphabet, used in technical terms it means efficiency! Many years ago, back in 1979 the japanese company ETA POWER was foundet and ever since has put it s highest attention to improvement of efficiency! Since more than two decades ETA has been doing extensive research, as a result of it, ETA Power is now ready and proud to present a new generation of converters!

The brandnew NVD-Series is a DC/DC converter which has been developed according to latest research results in material and implementation of state of the art components, mainly magnetics. All this together with a superb and new topolgy has brought a significant improvement of efficiency, currently worldwide one of the most advanced in the industry!

This new NVD-Series will be firstly highlited in Powerpulse magazine. Based on a constant level of 94% of efficiency over the whole input range, the converter can maintain max. load without using additional fan or heatsink elements. Needless to say that the NVD-Series are built according to the relevant IEC standards.

Beside the superb efficiency there is the remarkably small size to be mentioned! Packed into an aluminum chassis the size is not bigger than a mobile phone!

ETA offer an AC/DC power supply with an input voltage of 85-264Vac and
an output of 55Vdc @ 50W.
Output voltage is adjustable from 48-60Vdc.

These power supplies are in stock now but only while current stock lasts
- So do not delay - contact us now!

Bridging the gap to environmentaly friendly power conversion technology and
production processes according to ROHS directives ETA was awarded with
the ISO 14001 Certificate in April 2004!

The current increase of interest in lead-free soldering technologies is being driven by both legislation in the EC and commercial activities in Japan. The electronics interconnection group at NPL is at the forefront of activities in the UK investigating the technical and implementational challenges facing the industry changing from Sn/Pb solders to the lead-free alternatives.

ETA has already made various sample tests with several ETA power supplies and can today provide lead-free soldered PCBs upon request and it will be production standard from the end of the2nd quarter of 2004. Reability tests with lead-free soldered models (for example BNM-12SA) have been conducted throughout 2003 and were successful at ambient temperatures between 30 to +850C without any failures, including vibrational testing.

Eutectic 63Sn/37Pb solder has been the dominant soldering material in the joints of electronic components for decades. The harmful impact of lead to the environment and human health has, however, led to an international trend to change national legislations to ban the use of lead in the manufacture of electronic products.

In the EU the proposed phase-out of lead via the ROHS (Restriction of Hazardous Substances) Directive is either in 2006 or 2007.

The implementation of lead-free soldering materials requires not only changes in reflow profile, but also special attention to the selection of components and printed circuit boards (PCB), since in addition to solder paste, the component platings and PCB substrates will also be changed to lead-free ones. Incorrect process parameters or material selections may increase susceptibility to damage of thermally sensitive components or lead to excessive thickening of intermetallic layers, thereby leading to reliability problems.

ETA POWER has released its first footprint power supply with PFC! The new openframe power Supplies BF-Series have been developed for embedded power systems.

The 100W and 150W Series are equipped with an ACTIVE power factor circuit, inrush current limiter, over / under voltage protection and as safety device for over current regulation.

An double layer epoxy printed circuit board is the basic for a stable and proper function. Moisture and heat will not make any damages to the board thereof.

Two inlet filters taking away EMI disturbances. The BF-Series are convection cooled and is good for temperatures ranges between -25 and + 550C without derating. Using forced air cooling the unit can maintain up to + 750C. Nine single outputs (3.3, 5, 6, 9, 12, 15, 24, 36, 48Vdc) making the BF-Series to a very attractive power supply for designers and customers.